
Everything starts with layout. Where the sink, cooktop and island go changes how much stone you need and how it has to be cut, and that shapes the price more than the colour you choose.
You don't need an exact budget yet, just a price range you're happy with. Stone is usually sold in price groups, and the same material can sit in a lower or higher group depending on where it was quarried and how rare the pattern is. Share your range early.
You don't need measurements, drawings or a finished plan before you talk to us. We take the measurements ourselves later, so a conversation about the room and how you use it is plenty to get started. We encourage you to visit our showroom, and bring a cabinet door, a paint chip, a piece of your flooring or tile.
Here's what's actually going into Canadian kitchens and bathrooms right now, and how it breaks down.
Approximate share of kitchen and bathroom countertops by material across the Canadian market.

Quartz is one of the most in-demand materials for Winnipeg homeowners. It never needs sealing and resists stains by design, though heat is its weak spot: the resin binding it scorches permanently. Prolonged direct sun can also change its colour over time, so it is not suited to outdoor use.

Quartzite, despite the name, is 100% natural stone, formed from sandstone that has been superheated and compressed. It's harder and more heat-resistant than engineered quartz, but needs periodic sealing. One caution: several slabs sold as quartzite, Super White and Fantasy Brown among them, are actually dolomitic marble, and they etch from lemon or wine where real quartzite doesn't.

Granite is scratch and heat-resistant, with natural beauty and proven durability for heavy daily use. Marble etches and stains more easily than the others. Many homeowners come to see that patina as part of its charm, which is why it tends to suit vanities and islands better than a busy family kitchen.


Porcelain and sintered stone, sold under names like Dekton, offer near-zero maintenance and a convincing marble or concrete-look finish, and can even be used vertically on a backsplash or feature wall. We also carry slate and onyx, which are chosen more for their look than for heavy kitchen duty and suit a vanity, a bar or a feature surface.

See the slab itself wherever you can, especially with natural stone. It is not always possible, since some suppliers keep their showrooms outside Winnipeg, but lighting, veining and pattern can look completely different on a full slab than on a sample chip.
Staff tip
Kylie, Countertop Specialist
“A small sample is a general idea of the material, not a picture of your countertop. Veining that looks quiet on a chip can take over a whole island, so ask what the full slab looks like before you decide.”

Your edge profile sets how heavy or light the counter looks. Most are straightforward to produce; the last two involve a good deal more work in the shop.
An eased edge is a square edge with the sharpness taken off. It's the most common choice, and that small rounding is what protects the corner from chipping.
A sharp square edge gives a crisper, more modern line. It's also the most delicate profile to polish and to live with.
A bullnose is fully rounded top to bottom, soft and family-friendly. Water does run off the front onto your cabinet doors rather than sitting on the counter.
A demi-bullnose is rounded on top and eased underneath, giving you the soft feel while keeping water on the surface.
A bevel is a flat angled face that adds a subtle shadow line. Easy to wipe, and it reads modern.
An ogee is a decorative S-curve with a classic look, and its grooves are best cleaned with a brush.
A mitred edge, sometimes called built-up, joins two pieces at a 45-degree angle so a thin top reads as a thick one: a 2cm top looks like 4cm, a 3cm like 6cm. It takes extra work in the shop and the veining has to line up through the joint.
A waterfall is a panel running down the end of an island to the floor. It usually takes a second slab and the veining carries around the corner, which is where the craft sits.
Mitred edges and waterfalls take considerably more work in the shop, so ask for each as its own line on the quote.
On sinks, an undermount hangs below the counter so the stone edge around it is visible and finished, while a drop-in sits on top and is simpler to cut for. And a useful pairing rule: one loud surface per room. If the island is dramatic, keep the backsplash and perimeter quiet.

Your counters spend about 12 business days in the shop, depending on your edge profile and how many cutouts and seams you have. Install day takes three to six hours for a typical kitchen.
Your old counters need to be removed before we measure, so the sink may be out of service from that day until install day. On a typical job, that is a couple weeks.
How a typical job runs
01
3 to 10 days out
From your first call to a scheduled appointment.
02
1 to 2 hours on site
We digitally measure your actual cabinets, not the drawings.
03
About 12 business days
Your slab is cut, edged and polished to that template.
04
3 to 6 hours
Final install. Most kitchens are done in a single day.
Staff tip
Kylie, Countertop Specialist
“People are often surprised that we need the actual sink before cutting the countertop. Even sinks that are the same size can have slightly different shapes, so we need the exact one to make sure the cutout fits.”

Heat damage isn't limited to obvious sources like roasting pans or other hot cookware. It can also occur from appliances such as slow cookers, Instant Pots and air fryers that generate prolonged heat when left running in the same spot for several hours.
Sealing is straightforward. Quartz and porcelain never need it. Granite, quartzite and marble do, at intervals that vary by stone, so ask what yours needs.
For cleaning, mild soap and water handles everything here. Keep bleach, oven cleaner and abrasive sponges off all of it, keep vinegar off natural stone, and go easy on daily disinfectant wipes on quartz, which dull the finish over time.
Chips are rarely the disaster people fear. A colour-matched repair makes them hard to notice, though not invisible, and they hide best in veined patterns. If the piece came off cleanly and you saved it, we can often bond it back in, which looks better still.

Winter here is easy to work around once you know a few things. If a slab arrives off a cold truck, it needs time to come up to room temperature before fabrication. Cold surfaces can develop condensation, which can interfere with a good seam bond.
On installation day, make sure your home has heat and power on. Our adhesives cure best at roughly 10C or warmer, so a new build with no furnace running yet isn't ready for countertops, whatever the schedule says.
Finally, make sure the path to your home is clear of snow and ice. Carrying heavy countertop slabs requires safe, unobstructed access, so don't forget the steps, walkways and entrance.
Ask every fabricator these five questions, word for word.
Staff tip
Kylie, Countertop Specialist
“When two quotes look wildly different, I’d check three things: how the square footage was counted, which price group the material is in, and what’s been left out. The edge profile is rarely the reason.”

A complete quote shows you four things:
None of these means a company is dishonest, but each is worth a second question before you sign.

Natural stones require sealing but engineered stone like Quartz and Porcelain do not.
Quartzite is a natural stone, so every slab is unique and variation is expected but does require some maintenance like sealing. Quartz is an engineered surface that generally provides more consistency in colour and pattern and does not require sealing.
Natural stones and porcelains are made to sustain heat. Quartz does not tolerate heat and will require a trivet to be used.
Most chips in quartz can be repaired, although the repaired area may still be slightly visible. If possible, keep the chipped piece, as it may be able to be adhered back into place. If the piece is unavailable, a coordinating epoxy can often be used to fill and repair the damaged area.
Seam locations depend on slab size, material limitations, access, countertop dimensions, structural requirements and fabrication considerations. The final seam placement is determined during the templating and production process. Seam visibility depends on the material, colour, pattern and lighting. Epoxy is colour-matched as closely as possible, so that seams are less visible.
In some cases, yes. Most manufacturers or natural stone providers will have showrooms across Canada but not all are located in Winnipeg.
Walls are rarely perfectly straight or square. Small gaps may occur and are typically covered by backsplash, tile or caulking depending on the project.
Let’s bring your project to life.
Request a free quote today.